Troubleshooting HP Printer In Error State Windows 10 Issue

There are chances that you will face this problem if you have just upgraded to Windows 10. Whatever the reason could be! We are here to troubleshoot the HP Printer in error state Windows 10.

Check Common Connections

  • Make sure the USB that you used for connecting is secure
  • Also, make sure that the power cord is working properly
  • Ensure that there are no loopholes

Try Restarting the Printer and the System

  • First of all, normal restart the HP printer and your windows 10 system
  • Power off the printer and then the windows 10 system
  • Now, turn on the both of them

Common Troubleshooting Tips

HP Printer in Error State Windows 10

HP Printer in Error State Windows 10

  • Check if the printer is in turn on mode after getting the error message
  • Make sure you insert the printer cable into the system and the printer
  • The device doesn’t run on paper or low ink, the paper isn’t jam, and the flip is closed
  • Make sure the driver you download is for the windows 10 system and also it is for the correct HP printer that you are using

Another Restarting Method

  • Turn on your HP printer
  • Make sure there is a secure connection to your printer to the windows 10 system
  • Now remove the power cord
  • Open the printer and look for paper jams, ink spills, and other problems

Make sure you Load the Paper

  • It is essential to verify if the paper is loaded onto the tray of the printer
  • You need to make sure that the printer is switched off before you do this
  • Turn on your printer now and wait a minute for your HP printer to be prepared
  • Now check for the issue
  • The proper troubleshooting for HP Printer in error state Windows 10 is by using the device manager only

Using the Device Manager

  • Click the Taskbar Start icon, type devmgmt.msc, and click Enter
  • Once the Device Manager shows the list of devices in alphabetical order, click from the fall down on the “View” menu
  • Then later click on “Show hidden devices”
  • Here you can discover Ports (LPT), right-click it, and choose Properties from the menu context
  • This will launch the properties wizard
  • Switch to the Port Settings tab in the Properties window
  • Now, just before activating Legacy Plug & Play, make a checkmark in the box and click OK
  • Finally, restart your PC to save the shift in environment and hopefully, your printer should work well
  • If your issue is not solved, advance further and try out the other troubleshooting options

Uninstalling the Device Driver of the Printer

  • Navigate to the control panel
  • And then to the device manager option
  • Click on your Printer from the Device Manager list
  • You will see the printer linked to your laptop after expansion, right-click it
  • Additionally, choose Uninstall from the context menu that appears
  • A warning pop-up prompts, “You’re about to uninstall this tool from your system”
  • Select “Yes” and enable full uninstallation of the driver
  • Make a note that you should not select the box just before “Delete this device’s driver software”
  • Reboot your PC and check if it’s the previous issue for Printer in Error State
  • After that, you can begin the printing task
  • Then pursue the next technique if you encounter the issue again

Download the Correct and up-to-date Driver

Before you download the correct driver to solve the HP Printer in error state Windows 10, make sure you have the following

  • The HP printer
  • Make sure that the printer is connected to a wireless network
  • Or else make sure you connect it using the USB
  • Navigate to the HP support page and select the drivers and software on the top blue tab
  • Next on the printers
  • Type the name of your printer
  • In the next page make sure the detection is Windows 10
  • Find the drivers in the bottom
  • Download the correct driver, install it by double-clicking, and then follow the on-screen instructions
  • Now try printing the document that you want to print

Make Sure your Printer is Online

  • Click the Start button and pick the’ Control Panel ‘ button
  • Choose the option’ Devices and Printers’ Check whether the printer is offline or online
  • Moreover, If it’s online, you will find a “Ready message”
  • Set the printer online by right-clicking on the printer and then select the’ Use Printer Online’ option

If you are still facing the HP Printer in error state Windows 10, don’t hesitate to chat with our customer care team @